County LogoClallam County, Washington

Property Search

WEBSITE UNDER CONSTRUCTION – ENHANCEMENTS TO FOLLOW

Disclaimer and Comments

  • WEBSITE UNDER CONSTRUCTION – ENHANCEMENTS TO FOLLOW
  • Open public records is authorized by the state of Washington RCW 42.56.
  • The Clallam County Assessor & Treasurer - Property Search program is under construction. We are currently working on making Assessor detail information on improvements and land available for the 2009 assessed value for the 2010 tax base.
  • 2010 tax information is current and reflective of payments made within 2 days of your search.
  • 2008 assessed values are available, which is what the 2009 taxes are based on. The 2009 values are in development and will be available soon.
  • Check back soon for answers to Frequently Asked Questions. If you have trouble displaying the program on your computer, check the Troubleshooting page. If you have questions or comments about the data or features of the program, contact the Assessor's office at

Tips and Searching / If Property Search returns no results...

Property Search can be finicky with fastidious search requirements. Try entering your search differently, as follows.

Owner Name Search

When searching by Owner Name, try searching only by last name. If you search for "JAMES KIRK", it is looking for a record containing the exact phrase "JAMES KIRK". Therefore, if James Kirk is in the system as "JAMES KIRK", it will work. But if he is in the system as "JAMES T KIRK", it will NOT work. To be sure, if you are searching for James Kirk, enter only "KIRK".

Example:
sample snapshot of owner name search

Property Address Search

When searching by Property Address, be sure to enter only the street number in the Street Number field, such as "223", not "223 E 4th". And, in the Street Name field, it must be entered exactly is it is recorded in the system. Numbered streets (16th, etc.) must be spelled out ("Sixteenth"). Street Directions are "N", "S", "E", "W", etc. (don't include a period). If you type "4th" in the street name field, it will return no result if the street is recorded as "FOURTH". So, try different variations. Normally, if the street name is a number, it will be recorded as "FOURTH" instead of "4th". If the street is a word, try searching the first few characters of the word. Let's say the street is "Fairmount", but it could be recorded as "Fairmont" or "Fairmount". Try entering only the first few characters, such as "FAIR". If you search "FAIRMONT" and the address is recorded as "FAIRMOUNT", it will return no results. But, if you search "FAIR" it will find address with both "FAIRMOUNT" and "FAIRMONT", if both exist. Some street/road names are abbreviated. For instance, "Blue Mountain" is "Blue Mtn" in the Assessor's records. Similar abbreviations are used throughout the County. If an address with a similar type name fails, try an abbreviation. Highway 101 and Highway 112 Addresses should be entered as "HWY 101" or "HWY 112".

Example below will locate the courthouse at 223 East Fourth Street:
Sample snapshot of property address search

Geographic ID (12 to 16 digit Geo Parcel Number)

Geographic ID is the Geo Parcel Number. This is a 16-digit field, however, only 12-digits are normally required for the search to work. (The program automatically adds four zeros to the end of 12-digit entries.) Be sure to input any leading zeros. When a 12-digit entry results in "None found", try re-entering the number, then add '1000' or '2001' to the end. When a 16-digit entry results in "None found", try re-entering the first 12-digits only. The program will automatically add four zeros to the end of 12-digit entries.

If the Geo ID has a zero "0" at the beginning, you must enter it. Zeros at the end are not needed. The first few characters must be correct. So, let's say the Geo ID number is 0630006455500000. If you enter "0630006455500000", it will work. If you enter "06300064" it will work, even though you left off the "55500000". However, if you search "630006455500000" (left out the first "0") it will NOT work. The last four-digits of a 16-digit Geographic ID (Geo parcel number) are used to divide a "single lot of record" into multiple tax parcels, where portions of a property are taxed at different rates, or a property has multiple owners who require separate tax records. Note: This process is not a legal subdivision of property. It is for assessment and taxing purposes only. These last four numbers will be '0000' for the most part. Segregated parcels will always have a '1000' record and a corresponding '2001' record. Some parcels are divided even further, indicated by '2002', '2003', etc. Parcel numbers ending with '3000' and above denote special types of property--condo units, boathouses, Reservation lands--that require specific identification for processing purposes. Note, the "Property Number" field is a 5+ digit number and is NOT the parcel number.

Example:
sample snapshot of parcel number search

For more information contact the Assessor's Office.

Printing and Other Issues

When printing in Property Search, make sure you set the orientation to Landscape in your Print Preferences or setup.

Troubleshooting


If the Property Search Page will not load in your browser, please try the suggestions on our main Help Page. If it still doesn't work, contact the Webmaster.

If Property Search page will load but you have other questions that are not answered on this page, please contact the Assessor's Office.